Home / Knowledge Base / Hardware Styles | Indoors

Hardware Styles | Indoors

Skip to main content
Go Back

Curtain Track | Mounts

Industrial curtains suspended from ceiling-mounted track hardware, providing robust partitioning in factory or warehouse areas.

Ceiling Mounts

Mounts directly to the ceiling. The track then allows for the curtain to roll side to side on rollers.
Side-to-side movement: YES

Request A Price
Wall-mounted industrial curtain track and curtain setup showing heavy-duty mounting hardware for vertical surfaces.

Wall Mounts

Mounts directly to the face of a wall or vertical surface. The track then allows for the curtain to roll side to side on rollers.
Side-to-side movement: YES

Request A Price
Industrial curtains hung from chain and cable drop hardware, ideal for overhead clearance obstacles in workshop environments.

Chain or Cable Mounts

Use a chain or cable to drop down from high above to suspend the curtain. The track then allows for the curtain to roll side to side on rollers.
Side-to-side movement: YES

Request A Price
Industrial curtain track supported by threaded rod mounts, enabling drop-down curtain partitions for high ceilings.

Threaded Rod Mounts

Use a threaded rod to drop down from high above to suspend the curtain. The track then allows for the curtain to roll side to side on rollers.
Side-to-side movement: YES

Request A Price
Curtain hardware beam clamp installation for industrial curtains, supporting heavy curtain loads from structural I-beams.

I-Beam Mounts

When connecting to a truss, I-Beam or any other horizontal steel support, this style of mount works best. Once connected, you simply tighten down the set screw.
Side-to-side movement: YES

Request A Price
Stainless steel industrial curtain track section showing modular design suited for intense industrial curtain systems

Free-Standing

Vertical uprights with base plates hold up the curtains. The curtains can be then fixed in place or rolling side-to-side on the curtain track. Note this is for curtains of 14′ in height or less.
Side-to-side movement: YES

Request A Price

Static Mount Hardware

Aluminum angle curtain mounting hardware with rugged industrial curtains attached

Aluminum Angle

Aluminum angle and Tek screws hold the curtain up. The angle is clamped to the joists or anchored into the roof deck. Then self taping Tek screws are screwed into the angle through the curtain grommets with a washer to pinch the curtain to the angle.
Side-to-side movement: NO

Industrial curtain hanging attachment clamp for hanging hooks from I beams in warehouses

I-Beam Clamps

The I-Beam clamps allows for mounting to any flange such as joists, purlins, and of course I-Beams. The eye hook then goes through the grommets and into the bottom of the clamp.
Side-to-side movement: NO

Mounting Ideas (Not Supplied by AKON)

Stainless steel industrial curtain wire track system installed for sliding heavy curtains. including wire rope, turnbuckles and hooks used to securely hang heavy industrial curtains.

Tension Cable

You can hang your curtain using aircraft cable, S-hooks, and cable turnbuckles to tighten the cable. The S-hooks go through the curtain grommets. Not supplied by AKON but readily available from most hardware stores and online stores.
Side-to-side movement: YES

Industrial curtain roller hook magnetically attached to reinforced curtain panel, showing smooth directional movement along a heavy-duty curtain track.

Magnetic Hooks

Magnetic Curtain Hangers can support 65lbs for each hook. They are a versatile option for hanging  curtains that don't require any drilling. They also allow you to quickly take them down when not needed. You would only need a few of these to support a long stretch of curtain. Not supplied by AKON but readily available from most hardware stores and online stores.
Side-to-side movement: NO

Video Guide