How does the skirt mount to the lift table?

There is a 76 mm flange pocket on the top and bottom of the skirt that attaches to the side of the lift table as shown below. In this pocket you will slide in a flat steel bar that we provide and use the Tek screws that are also provided to bolt the skirt to the lift table every 305 mm. If you do not choose flat steel bar mounting then the skirt will still have the pocket for you to mount it using other methods.

Does the skirt need to attach at the bottom?

Most installations allow for the skirt to rest on the floor while only the top is attached. The weight of the skirt often is enough to keep the skirt on the floor. We also have optional weight bars for the bottom which can be ordered and added after the skirt is installed.

What is the difference between internal and external fold?

• Below you can see that the folds of the bellows can face outward, or inward depending on what style you want.

• Please be aware that internal fold bellows need adequate room facing inwards for the folds.

• For instance, if you have a 1270 mm x 1270 mm top size and a 1270 mm x 1270 mm bottom lift table size then an internal fold will not work.

• Pit lifts that are mounted in the floor generally always need an internal fold for them to work.

• Internal folds have the smallest footprint for conserving space.

• External folds are the most common and best option for when you are unsure that an internal fold will work.

Are there any OSHA requirements regarding scissor lift table skirts?

The Occupational Safety and Health Administration (OSHA) regulates workplace safety around pinch points to reduce occupational injuries. According to the OSHA definition, pinch points are points on presses and other workplace equipment where workers could get a finger or other body part caught between two moving parts. The OSHA warns that pinch points can cause severe injuries, including amputation, and regulates work practices for workers exposed to pinch points.

Scissor lift tables have scissors which are a very dangerous pinch points. Thus, if the lift table is not properly shrouded with a lift table skirt then OSHA will issue your facility a fine. This includes mobile scissor lift tables.

Are there any specific requirements for having skirting on scissor lift tables? Are they absolutely required?

If OSHA comes to your facility and finds a scissor lift table that is not skirted / guarded then you will most likely be fined. A scissor lift table is a pinch point hazard and industrial facilities have to guard against pinch points. In addition you are providing a safer work environment for your workers.

Can you please give us the OSHA Rule or reference that speaks about guarding of pinch points?

OSHA does not specifically call out lift tables in their documentation. Rather they call out pinch points and shear points which can be present with many different machines. These pinch points and shear point must be properly guarded to protect your personnel.

Rapid Quoting and Shipping

• Only minimal information is required for a quote
• You can expect your quote within 10 to 15 minutes
• Standard lead times are only 7 to 10 working days
• Bulk discounting is available for OEMs and distributors
• Industry-leading warranties for workmanship

Easy Installation

• Optional side Velcro for wrap around install
• Steel flat bar for positive bolt on mounting
• Top fold venting to prevent bellowing
• 22oz Vinyl Vs thin 18oz Vinyl used by others
• True lock stitching versus traditional stitches

Any Configuration

• Choose from 1,2,3,4 or more sides
• Only guard the pinch point sides
• Made to any size and dimensions
• Single sided bellows fold neatly
• Upload or use our form for a quote

Frank - General Motors - "The lift table skirting is lasting longer than our previous supplier. The other supplier we used in the past fabricated their lift table guards using 18 oz vinyl and I believe that Akon's 22 ounce vinyl makes all the difference in the world. The skirts still have not worn out and they are performing greatly"

George - Procter & Gamble - "We are extremely pleased with the quality of workmanship, and especially pleased with the quality of the stitching. Other skirts we have purchased had stitching that was not straight and that was coming undone. The stitching quality makes all the difference in the world for longevity, and Akon seems to have the best."

Justin - Ford Motor Company - "The pricing and the speed of delivery were key in our decision to choose Akon Skirting and Bellows. The product arrived on time as promised and so far the lift table bellows are performing great"

A Few Of Our Valued Customers

Often people only take time to complain about a purchase. My cover from alco covers was perfect, fits like a glove, looks great, and was done ahead of schedule. Would buy again if needed! Thanks guys!
Wendel

I have placed three orders with this company. The customer service is outstanding. They walked me through the measuring process to get it exactly correct. The quality and workmanship of the this first cover surpassed our expectations.
Jackson

I couldn't be more happier with the cover. The quality was even better than I imagined and is very durable and fits exactly as measured. Their process to help me know what to measure for best results was excellent.
Greg Meadows

Incredibly helpful in making my custom design; responsive; delivered on time and great value
Jack Wagive

Great cover!! Heavy duty and perfect fit. Stitching is very nice and sturdy!! I am very pleased with my purchase. It’s a great value for the quality and price of the cover.
Brian Kilbourne

These custom covers are fantastic. The process was simple, some measurements, sent some pics and chose my color, etc.. These are custom, so they didn't arrive 2 days later, but when they did arrive, fit like a glove and are certainly the best quality cover I have had. More expensive?? Yeah, they were. Worth it?? Definitely. I'm in south Louisiana with tons of sunlight, tons of rain, tons of humidity and these covers are great. I know I will be extending the life of my outdoor furniture by years and I know these covers will last for years.
Scott Fitzbarn

Cover was made to specs i requested with good quality material of my choice. Craftsmanship of my custom cover is excellent.
Briana Cumbers

FINALLY, a cover that is well worth the price! We live in Southern California where the sun can do some damage. I don’t know how many other covers I’ve been through since we’ve had the firepit that just fell apart after a few months. This one is the real deal! Fits perfectly, very durable, you get to pick your color, and it withstands the sun and recent heavy rains!
Mary Wadsworth

We had a custom fire pit created for our pool area and we wanted a cover for the winter months. I sent a few pictures and the measurements and we had a custom cover made. It’s well-made and arrived quickly! We are very pleased and highly recommend alcocovers!
Michelle Schaaf 

Great covers, quick service on custom heavy duty covers. I plan on ordering more for my other outdoor products. Thank you!
Barbra McDonald