Width

• Measure the distance that you are trying to cover.
  • Add 5% to that dimension for proper drape and coverage

Height

• Measure the distance from the floor to the mounting point.
  • Take that dimension and subtract 7.5 cm
    • By subtracting 7.5 cm for the hardware, the curtain will sit just above the floor and allow the floor sweep to rest lightly on the surface.

 

Need More Help? Watch This

---

 

Common Questions

---

• Standard curtains have approximately 9.5 cm to 2.5 cm of a gap from the bottom of the track to the top of the curtain.

What are the dimensions of the track?

• Yes, the track is designed to be cut on site using a hacksaw or sawzall.

• The track is modular in design and will arrive in sections that bolt together easily.

• The track should be supported approximately every 1.5 m. For lighter curtains, spacing can be up to 2.4 m. Your order will include enough supports for the 1.5 m spacing.

• Yes. This is known as a flush-mount installation. Drill through the centre of the track and secure it with screws or bolts. Space the fixings roughly every 0.9–1.5 m.

• Installation is straightforward. All components connect with set screws. If you have any issues, simply call or email us and we will guide you through the process.

• The track is hot-dip galvanised (HDG), offering long-term corrosion resistance even in harsh environments. It typically corrodes at around 1/30 of the rate of bare steel in similar conditions.

Outer Layers

The outer layers of our insulated curtains are made of both 13oz and 18oz vinyl which is reinforced with a polyester scrim. It is waterproof fabric that is easy to wash down should it become dirty. The material will not absorb liquids and stains so it will look great for many years. 18oz coated vinyl is ideal for outdoor use for temperatures going as low as -29° C. Please be aware that if folded below these temperatures or blown around in the wind the vinyl may crack. If you select outdoor use on this form you will receive the 18oz material.

Inner Batting

The inside insulation is a poly fibre insulation that does not use fibreglass. The material is wedged inside the skins and stitched in place so that it will not settle towards the bottom. The insulated thermal garage curtains get their insulating properties from the air space that this batting creates.

Weights | Thickness

• R3 – 7.2 mm Thick, 3.8 oz per square foot
• R6 – 13.5 mm Thick, 4.75 oz per square foot

To calculate: take your (W x H) × (oz per square foot) = Total Weight kg

Curtain Features

Curtain Valances

A valance is made from the same material as the
lower curtain. They are used to seal the opening
above the curtain. This is generally the space from
the roof deck to the bottom of the joist or purlin.
They can be rectangular or follow the slope of the roof.

 

Floor Sweeps

A floor sweep seals the open area between the
curtain and the floor. It attaches to the main
curtain by Velcro. They are 15 cm tall and as wide
as the entire length of the curtain. These are
ideal for controlling dust, fumes, odours and
other undesirable elements. They can also be
replaced in the future should the friction from
the floor wear them out.

 

Anchor Straps

Velcro straps hold your curtain in place if wind
is present or a more secure curtain is required.
These anchors feature Velcro straps which loop
through a D-ring which is anchored into the
concrete floor. Typically spaced every 1.22 m.

 

Seal Velcro

Seal Velcro, also known as adhesive Velcro, sticks
onto your curtain and can be installed on site.
Please note that this is not ideal for low-temperature
applications or high-frequency use.

 

Chain Weights

If you have a slight breeze or are power washing
near the curtain then we can add a galvanised
4.8 mm chain weight to the bottom of the curtain.

 

Connecting Curtains

Velcro

Velcro is used to connect curtain sections
together to form larger curtain walls. The
Velcro also serves as an access point for
larger curtains and makes them easier to
install.

 

Magnets

Seal magnets are an ideal way to attach curtains
to each other or adjacent steel walls and beams.
Best utilised in dusty areas that would clog up
Velcro.

 

Entry Options

Sewn In Strip Doors

Strip doors that are sewn into the curtain are
ideal for light foot traffic. This allows for quick
movement of people into and out of the
industrial curtains.

 

Free Standing Strip Doors

For motorised traffic a free-standing steel frame
strip door is ideal. The steel frame takes the
stress off the curtain wall, ensuring longevity
and performance for motor traffic and high use.

 

Swinging Impact Doors

A free-standing industrial swinging door can
also be provided for access. Also known as
impact doors, these heavy-duty doors can
withstand a lot of use from trolleys, fork-lift
trucks or heavy foot traffic.

 

Roll Up Doors

Supported with a free-standing steel frame,
the powered roll up doors can be opened and
closed via remote from a fork-lift truck. Door
styles and prices vary based on frequency
of opening and closing, speed requirements
and size.

 

Colours

 

How much more expensive are the industrial insulated curtains versus the standard curtains?

• Our industrial insulated curtains are about 3x the investment of our standard industrial curtains. Customers often ask if they should just purchase a standard curtain to save money. Our answer is generally based on how long you intend to use the curtain. For instance, if you plan to utilise the divider curtain for many years then you will recoup your investment with energy savings. If you only plan to use the curtain for one or two seasons then you could save money by going with the standard curtains. Keep in mind the standard industrial curtains have an R1 insulation value.

What is R Value?

• The insulation value of a thermal insulated curtain wall is measured by what is called an R value. In basic terms, R value is the capacity of an insulating material to resist heat flow. The higher the R value, the greater the insulating performance. AKON provides R3 and R6 insulated industrial curtains. The map below shows insulation R value recommendations as a point of reference.

 

Should I choose R3 or R6?

• We find R3 is a good fit for most applications. You should take into consideration the guidance above and the length of time you expect to use the thermal industrial curtains. The colder your location and the longer you will rely on the curtains, the more likely we are to recommend the higher R6 material.

When folded up how much space does it take?

• The insulated industrial curtains fold up to about 6.4 cm per 30 cm of curtain width. So a 3 m wide curtain would fold up to approximately 64 cm.